Home / Spaces

School makerspaces designed around the work, not the equipment list.

School makerspace and innovation lab design. You have the funding and a room. We plan the equipment, layout, safety and teacher launch so the space works for students on the first day and the five hundredth.

Students building circuits and prototypes around a shared worktable in a school makerspace
Students at a shared build table.

Maker activities need eyes on workflow, bottlenecks, acoustics and safety. Architects make sure the building works. Nobody on the team is asking how twenty-four eighth graders will move through the room with a half-finished project in their hands.

What goes wrong without a maker expert in the room

Equipment in the wrong place

The laser cutter ends up across the room from the computers that feed it. The loud tools sit beside the quiet work.

No ventilation or power plan

Laser fume extraction, dust collection and dedicated circuits get discovered after the walls are closed.

Pinch points

The bottleneck is almost always the machines: one laser cutter, one printer, a whole class waiting. We plan around it with module rotations, laptop design stations and furniture that moves.

A showpiece that sits idle

Teachers were never shown how to teach in it, so the room gets locked and toured instead of used.

Educators working in an open innovation space with exposed ductwork, tool storage along the wall and movable tables
Teachers in an open innovation space. Ducts and power run overhead, so tables can move anywhere.

How we design for student workflow

We start with what students will make, then work backward to the room. A fourth-grade cardboard unit and a high school robotics team need different tools, different storage and different supervision.

Zones that match the work

Design is an exciting but messy activity. Messiness spurs creativity; too much chaos can stifle it. So: clean zones for design and computers, messy zones for building, and loud tools partitioned where a teacher can still see them.

Sight lines for one adult

One teacher should be able to see every station that can hurt someone from one spot in the room.

Where projects live

Work in progress needs a home between classes. Plan at least 20 to 25 percent of the room for storage, and most of it is for half-built projects.

Flexible on purpose

Furniture and power that let the room flip from class to club to community night without a crew.

What's included

Concept to curriculum, in one partner. Take the full scope or the pieces you need.

  • Needs assessment. What your students, teachers and community actually need from the space.
  • Equipment selection and specs. Laser cutters, 3D printers, CNC, electronics, textiles, hand tools and woodshop: specific makes and models with the reasoning behind each.
  • Layout and flow. Zones, adjacencies, storage and sight lines, coordinated with your architect.
  • Safety and infrastructure review. Ventilation, fume extraction, dust collection, power, data and acoustics.
  • Budget framework. Phased if the funding comes in stages.
  • Vendor coordination and install. Ordering, delivery and installation oversight.
  • Launch training and curriculum. Teachers trained on the tools and on teaching in the room. See PD and Curriculum.
Desktop CNC mill beside a laptop running toolpath software for a student circuit board
A desktop CNC mill set up to cut student circuit boards. Small mills like this can sit in a clean zone.

Every project is different. This is the shape most of them take.

A typical build timeline

Talk and assess

A 15-minute call, then a needs assessment with your leadership, teachers and facilities team.

Program and design

Zones, layout, equipment list and budget, reviewed with your architect against the floor plans.

Order and install

Specs, vendor coordination, delivery and installation oversight.

Train and launch

On-site setup, teacher training and starter curriculum, so students are building in week one.

Makerspace design questions

What does a makerspace consultant do?

A makerspace consultant plans the space around how students and teachers will use it: what to buy, where it goes, how people move through the room, what the building needs for ventilation, power and safety, and how teachers will be trained to run it. DesignCase covers all of that, from concept through curriculum.

When should we bring in a makerspace consultant?

As early as you can, ideally right after funding and before the floor plan is locked. Moving a wall on paper is free. Moving a dust collector after the walls are closed is not.

Can you work with our architect and facilities team?

Yes. We read floor plans and specs, review construction documents, and coordinate equipment, power and ventilation needs with your design team. Architects can also bring us onto the bid. See For Architects.

What equipment should a school makerspace have?

It depends on what you want students to make and how old they are. Most spaces mix digital fabrication (laser cutter, 3D printers, sometimes CNC), electronics, textiles and good hand tools. We recommend specific makes and models with the reasoning behind each, sized to your budget and your teachers.

We already have a makerspace that nobody uses. Can you help?

Yes. We audit the space and run hands-on PD that gets teachers building in the room with their own units. See PD and Curriculum.

Do you work outside Colorado?

Yes. DesignCase is based in Fort Collins, Colorado, and has designed and launched spaces in New York City, Rhode Island, South Carolina and Tokyo.

What ventilation does a school makerspace need?

Laser cutters need fume extraction, vented outside or through a filtration unit. Wood and CNC tools need dust collection. We specify both, with HEPA filtration where it's needed, check them against the manufacturer's requirements and your building, and put loud, dusty tools in a partitioned space a teacher can still see into.

Do you design fab labs and innovation labs too?

Yes: fab labs, innovation labs, STEM and design labs, and multi-room suites for K-12 schools, universities and workforce programs. The American School in Japan suite covers six labs across 8,000 sq ft.

How much does a school makerspace cost?

It depends on the room, the equipment and what the building needs for ventilation and power. We build a budget framework, phased if your funding comes in stages.

We have grant money with a spending deadline. Where do we start?

Start with what students will make and who will run the room, then lock the equipment list and budget against the grant's spending rules and deadline. Bring us in before the floor plan is final.

Let's talk for 15 minutes.

Tell us about your funding, your timeline and what you want students to make. We'll tell you honestly where we'd start.

Mark Schreiber
Mark Schreiber, founder. You'll talk with him, not a sales team. Or reach Mark directly: info [at] designcase [dot] co or call Mark.